Main technical parameters of Caibang NB600 automatic color mixing simulation machine:
Power: AC220V, 50Hz, 350W
Effective area of ink color bar: 40X210mm (4 bars) 60X210mm (3 bars) 100X210mm(2 bars), optional.
Printing dimension: 290X250mm
Outline dimension: 550x440x320mm
Ink uniforming speed: Three directly selectable rates on the control panel of the equipment, that is 400, 550 and 700rpm.
Each rate can be set freely from 0 to 1,000rpm, with stepless frequency conversion speed regulation
Printing speed: Three directly selectable rates on the control panel of the equipment, that is 10, 15 and 20rpm.
Each rate can be set freely from 0 to 30rpm, with stepless frequency conversion speed regulation
Ink uniforming time: 1-800s, adjustable.
Net weight: About 80kg
Advantages of Caibang NB600 automatic color mixing simulation machine:
Touch control technology, man-machine interaction is more convenient, any operation and setting functions can be easily realized on the screen.
Ink uniforming mode
1. Uniform speed can be switched between automatic and manual, suitable for different operating habits and special situations.
2. The series can set the soft start mode without intermediate positioning, reduce the left and right unevenness of color and the phenomenon of flying ink, and improve the precision of color spreading.
3. Ink-leveling mode setting: the program is divided into four sections to complete the process of homogenization, speed, time and mode independent settings
4. Four-stage uniform ink mode time setting (each section can be set to 0-200 seconds), can be set up any uniform mode: serial, intermittent close, fixed fit and automatic speed change, more accurate and humanized.
5. Homogenizing pressure (automatic): adjustable
6. Uniform ink pressure correction function: the instrument increases the electric color spreading pressure correction function, and the pressure correction zero position becomes simple and feasible.
7. Color spreading pressure (automatic):-1 to 1 adjustable. The touch screen can indicate the thickness of the color display material and the corresponding pressure value. The setting of the pressure is more accurate and convenient.
8. Fault detection: the whole machine uses PLC to monitor the electrical part, contact switch and induction switch on-line automatic detection status, fault checking and troubleshooting more convenient!
9. Calibration function: electric color spreading pressure correction function, instrument pressure correction zero position becomes simple and feasible
10. Speed setting of cleaning mode: the speed of separating and fitting cleaning can be adjusted stepless; saving cleaning materials, time, cleaning simple and easy
11. Color spreading accuracy: the difference of repeated color can be less than 0.5 (the average value of ten times) by using the optical density meter.